⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E57 Difficulty: Hard
Problem: High current on inverter.
How to Fix E57 Error (Step-by-Step)
- Unplug the dryer from its power source and confirm the error stays cleared during a full test cycle.
- Remove the necessary panels to access the inverter board and motor.
- Visually inspect the inverter board for any signs of burns or damage.
- Check the wiring between the inverter board and the motor for any loose or frayed connections.
- If the wiring is secure, the inverter board is likely the issue and needs to be replaced.
- Carefully disconnect all wires from the old inverter board and remove it.
- Install the new inverter board, reconnect all wiring, reassemble the dryer, and test.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 134735700
- 137099100
- 137261100
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply