Skip to main content
Appliance Fix Guide

Electrolux Dryer error code

Electrolux Dryer Error E17

Electrolux dryer E17 inlet sensor circuit open

Input sensor disconnected - The inlet thermistor or wiring to the thermistor is open.

Updated Aug 18, 2026
E17 = inlet sensor open — reset, clear lint, then test before buyingA meter decides between a loose connector, damaged wiring, and a failed sensor. Purchase only the model-verified part after testing.
Electrolux dryer repair guide for error E17
Error codeE17Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Reset the electronics

    Unplug the dryer for several minutes, then retry a short programme. A one-off electronics state can post a false open-circuit reading.

  2. 2
    Check the lint path

    Clean the lint screen and check the exhaust hood. Heavy lint buildup changes air temperatures and can trip sensor-reading faults.

  3. 3
    Note when E17 appears

    Record whether E17 shows at start or partway into heating. Start-time appearances point at the sensor circuit rather than a mid-cycle airflow event.

A quick explanation

What does E17 mean?

An unplugged sensor connector, damaged wiring, or the sensor itself sits behind this code. Reset and external checks come first; the sensor is a model-verified candidate.

The answer you came for

How to fix Electrolux dryer error E17

Reset, clear the lint path, retry. If E17 persists, the sensor circuit needs a meter — and any replacement sensor must be verified against the exact model first.

  1. 1

    Power reset and lint service

    Unplug for several minutes; clean the lint screen and check the vent hood; retry a short cycle with dry loads.

    What you should see: False readings from transient states or lint-restricted airflow are eliminated.
  2. 2

    Check sensor accessibility from the front

    On many Electrolux dryers the inlet sensor sits near the lint filter housing. With power off, look for a visibly unplugged two-wire connector and reseat it if present.

    What you should see: A disconnected sensor connector is found without panel removal.
  3. 3

    Test the circuit or book service

    An open-circuit confirmation needs a multimeter on the sensor. If you are not equipped for it, book service and quote E17 and your observations.

    What you should see: The sensor is proven bad (or cleared) before any purchase.
  4. 4

    Model-verify the sensor

    Inlet sensors vary by model. Match any replacement to the full model number before ordering — the candidate below is not a confirmed fit.

    What you should see: The ordered sensor fits the dryer exactly.
If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Faulty or disconnected inlet temperature sensor (thermistor)
  • Loose or damaged wiring to the sensor
  • Excessive lint buildup affecting sensor readings

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Possible part if diagnosis confirms failure

Inlet temperature sensor (thermistor)

OEM candidate: 5304520302

Why this part is shown: It is associated with Electrolux Dryer error E17 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Dryer Error Code Quick Sheet

Electrolux E17 explained — reset and lint checks first, the meter test that confirms an open sensor, and model verification before ordering.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Jun 22, 2026 · Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.