Skip to main content
Appliance Fix Guide

Electrolux Dryer error code

Electrolux Dryer Error E12

Non-fatal R/W error; problem reading or writing to memory or input/output.

Non-fatal R/W error; problem reading or writing to memory or input/output.

Updated Aug 18, 2026
informationalno_parts
Electrolux dryer repair guide for error E12
Error codeE12Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Turn the dryer off and unplug it for at least 15-20 minutes to allow the electronics to reset, then plug it back in.

  2. 2
    Check 2

    Inspect the wire harness connections between the main control board and other components to ensure they are secure.

  3. 3
    Check 3

    Carefully inspect the main control board for any visible signs of damage, such as burn marks or loose components.

A quick explanation

What does E12 mean?

Non-fatal R/W error; problem reading or writing to memory or input/output.

The answer you came for

How to fix Electrolux dryer error E12

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Stop the current drying cycle by pressing the 'Cancel' button.

  2. 2

    Step 2

    2. Disconnect the dryer from its power source by unplugging it from the wall.

  3. 3

    Step 3

    3. Leave the dryer unplugged for 10 minutes to allow the internal memory to clear and reset.

  4. 4

    Step 4

    4. Reconnect the power cord securely into the outlet.

  5. 5

    Step 5

    5. Attempt to run a new cycle to see if the error has cleared.

  6. 6

    Step 6

    6. This error is often a temporary glitch, but if it reappears frequently, it could indicate a more serious issue with the control board.

Read the additional checks from the current guide

How to Fix E12 Error (Step-by-Step) Stop the current drying cycle by pressing the 'Cancel' button.Disconnect the dryer from its power source by unplugging it from the wall.Leave the dryer unplugged for 10 minutes to allow the internal memory to clear and reset.Reconnect the power cord securely into the outlet and confirm the error stays cleared during a full test cycle.Attempt to run a new cycle to see if the error has cleared.This error is often a temporary glitch, but if it reappears frequently, it could indicate a more serious issue with the control board.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Electrolux Dryer Focused repair path: dryer airflow, heating, motor, sensor, and control checks. Do not treat the fault as reset-only if it keeps returning; use the failed function to choose the next test. Disconnect power before opening panels, then confirm whether the Electrolux dryer repeats the same code after a clean reset. Match the symptom to the part of the cycle or function that fails: fill, drain, heat, cool, spin, latch, ignite, fan, sensor, or control response. Inspect simple causes first: airflow, water supply, drain path, door closure, filter, venting, wiring connectors, and visible damage. Use meter testing or service diagnostics before replacing electronic controls, because wiring, switches, sensors, and loads can mimic board failure. Use the complete Electrolux dryer model number from the appliance tag before ordering any model-specific part. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Electrolux model number from the appliance tag before ordering. Recommended Parts to Check No exact official OEM part number is listed here because the correct Electrolux dryer part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Electrolux dryer thermal fuse Common replacement category: Thermal fuse Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: no-heat or no-start symptoms after venting and power checks. Search Amazon for Electrolux dryer thermal fuse Electrolux dryer heating element Common replacement category: Heating element Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: electric dryer no-heat symptoms after airflow checks. Search Amazon for Electrolux dryer heating element Electrolux dryer door switch Common replacement category: Door switch Fit note: Exact OEM part number varies by complete Electrolux dryer model number. Confirm compatibility before buying. Why this category can matter: start or cycle-interrupt symptoms tied to door movement. Search Amazon for Electrolux dryer door switch Before ordering: match the part to the complete Electrolux dryer model number on the appliance tag.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Main control board failure
  • Loose wiring connections
  • Visible damage to the control board

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134994700

Why this part is shown: It is associated with Electrolux Dryer error E12 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, FREE delivery on eligible items

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.

Reviewed by the Appliance Fix Guide Editorial Team

Last reviewed and updated Jun 22, 2026 · Educational repair guidance, not a professional diagnosis

  • Researched against manufacturer documentation and service literature where available.
  • Safety-first structure: every guide starts with the safest first action and states when to stop and call a professional.
  • Part compatibility is treated cautiously: fitment must be confirmed against the exact model number before purchase.