How to Fix Electrolux Dryer Error E00

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: E00 Difficulty: Easy

Problem: No error detected during the last cycle.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix E00 Error (Step-by-Step)

This code is informational and simply means the last drying cycle finished without any problems being detected by the system.
No repair or action is needed from you and confirm the error stays cleared during a full test cycle.
To clear the code from the display, press the ‘Power’ or ‘Cancel’ button.
After clearing the code, you can load the dryer and start a new cycle as you normally would.
Turn the appliance off, wait about 2 minutes, then turn it back on.
Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
Make sure all doors, lids, and hoses are fully closed and seated correctly.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes