⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: IA0 Difficulty: Hard
Problem: Indicates that the spray arms are not rotating. This could be caused by improperly placed dishes obstructing the arms or a power surge.
How to Fix IA0 Error (Step-by-Step)
- Turn off the dishwasher at the circuit breaker to ensure safety.
- Open the dishwasher door and remove the bottom dish rack.
- Check for any large food particles or debris in the sump area at the bottom of the dishwasher that could be obstructing the spray arms.
- Inspect the lower and upper spray arms for any visible cracks, damage, or clogged spray holes. Clean any debris from the spray holes with a small brush or toothpick.
- If the spray arms are clear and rotate freely, the issue may be with the circulation pump/wash motor, which is a more complex repair. Due to the complexity and the need for specialized tools, it is recommended to have a qualified service diagnose and replace the circulation pump.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
- Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply