Category: Uncategorized

  • How to Fix Whirlpool Refrigerator Error Er RF

    How to Fix Whirlpool Refrigerator Error Er RF

    Problem: Refrigerator compartment fan failure – air circulation fan not operating

    How to Fix Refrigerator Error

    1. Unplug refrigerator and remove all food from fresh food compartment.
    2. Locate evaporator fan assembly (typically behind rear wall panel in refrigerator section on French door models).
    3. Remove shelves and unscrew rear wall panel to access fan motor.
    4. Manually spin fan blade – should rotate freely without binding (ice buildup may prevent movement).
    5. Thaw any ice accumulation on fan blade using hair dryer on low setting.
    6. Disconnect fan wiring harness and measure resistance across motor terminals (should read 50-150 ohms).
    7. Verify correct voltage reaches fan connector during cooling cycle (12V DC or 120V AC depending on model).
    8. Inspect fan motor bearings for excessive play or grinding noise when rotated.
    9. Check wiring harness for damage near evaporator where moisture causes corrosion.
    10. If motor resistance is infinite or fan doesn’t run with power applied, replace evaporator fan motor WPW
    11. After replacement, verify proper airflow from refrigerator vents.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.