⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: EMPTY RESERVOIR Difficulty: Hard
Problem: The condensation water container is full and needs to be emptied.
How to Fix EMPTY RESERVOIR Error (Step-by-Step)
- Unplug the dryer from the power outlet and confirm the error stays cleared during a full test cycle.
- If your dryer is connected to a drain, ensure the drain hose is not kinked or clogged.
- For models with a condensation container, remove and empty it.
- Access the condenser area, which may be at the bottom front of the dryer, and remove the condenser unit.
- Clean the condenser by rinsing it with water and confirm the error stays cleared during a full test cycle.
- While the condenser is out, inspect the sump area beneath it for any lint buildup and clean it out.
- Reassemble all components, plug the dryer back in, and run a test cycle.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 00499500
- 00600925
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Bosch model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →

Leave a Reply