How to Fix Bosch Dryer Error E36

Error Code: E36 Difficulty: Moderate

Problem: Problem with the water drain; potential blockage in the drain tube, hose, or pump.

How to Fix E36 Error (Step-by-Step)

1. Disconnect the dryer from the power source by unplugging it from the wall outlet.
2. Locate the condensation drain pump, which is usually at the bottom of the dryer. You may need to remove a lower access panel.
3. Have a shallow pan and towels ready to catch any residual water.
4. Disconnect the hoses attached to the pump. Check both the hoses and the pump inlet/outlet for any lint, debris, or other blockages.
5. If a blockage is found, clear it out completely. If the pump itself appears damaged or fails to drain, it will need to be replaced.
6. To replace the pump, remove the mounting screws holding it in place, install the new pump, and reconnect the hoses securely.
7. Reassemble the dryer, plug it back in, and run a test cycle to ensure it is draining properly.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.