Author: ApplianceFixGuide Team

  • How to Fix Maytag Dishwasher Error Door-Open

    How to Fix Maytag Dishwasher Error Door-Open

    Problem: Door not properly latched or door switch circuit open

    How to Fix Dishwasher Error

    1. Ensure the dishwasher door is fully closed and latched.
    2. Check for any obstructions preventing the door from closing completely.
    3. Inspect the door gasket for damage or debris that might prevent proper sealing.
    4. Check the door hinges for proper alignment and smooth operation.
    5. Remove the inner door panel to access the door switch mechanism.
    6. Test the door switch continuity with a multimeter (should change state when door closes).
    7. If the switch is faulty, disconnect the electrical connector and replace the switch.
    8. Check the wiring harness for any damage or loose connections.
    9. Clean the door strike plate and latch mechanism with a soft cloth.
    10. Test the door closure and ensure the error code clears.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Maytag error codes: Maytag Error Codes

  • How to Fix Kenmore Dishwasher Error F24

    How to Fix Kenmore Dishwasher Error F24

    Problem: Flow meter malfunction or incorrect water measurement

    How to Fix Dishwasher Error

    1. Access flow meter assembly and check for debris.
    2. Inspect impeller for free rotation and damage.
    3. Test flow meter sensor output with multimeter during water flow.
    4. Check flow meter wiring harness for damage.
    5. Verify flow meter calibration against actual water usage.
    6. Replace flow meter assembly if readings are inaccurate.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Kenmore error codes: Kenmore Error Codes

  • How to Fix Kenmore Dryer Error F13

    How to Fix Kenmore Dryer Error F13

    Problem: Igniter relay failure on gas dryer control board

    How to Fix Dryer Error

    1. Turn off power and gas supply to dryer.
    2. Remove control panel access cover.
    3. Inspect main control board for burnt igniter relay contacts.
    4. Test igniter operation during heating cycle start.
    5. Check voltage supply to igniter circuit.
    6. If relay is faulty, document all wire connections.
    7. Remove mounting screws and disconnect all connectors.
    8. Install new main control board assembly.
    9. Reconnect all harnesses and restore gas supply.
    10. Test ignition sequence and flame operation.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Kenmore error codes: Kenmore Error Codes

  • How to Fix Kenmore Dishwasher Error F25

    How to Fix Kenmore Dishwasher Error F25

    Problem: Turbidity sensor (water clarity) failure

    How to Fix Dishwasher Error

    1. Clean turbidity sensor lens with soft cloth and mild detergent.
    2. Check sensor wiring connections for corrosion or damage.
    3. Test sensor output signal during wash cycle.
    4. Verify sensor mounting and alignment in water path.
    5. Replace turbidity sensor if cleaning and testing fails to restore function.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Kenmore error codes: Kenmore Error Codes

  • How to Fix Maytag Dishwasher Error 8-2

    How to Fix Maytag Dishwasher Error 8-2

    Problem: Drain pump electrical problem

    How to Fix Dishwasher Error

    1. Disconnect power at the circuit breaker.
    2. Remove the lower access panel.
    3. Locate the drain pump assembly under the dishwasher tub.
    4. Disconnect the electrical connector from the drain pump.
    5. Test the pump motor windings with a multimeter for proper resistance.
    6. Inspect the pump housing for leaks or cracks.
    7. Check the pump impeller for freedom of movement and damage.
    8. If the motor is open or shorted, remove mounting screws and disconnect drain hoses.
    9. Install the new drain pump assembly with new gaskets.
    10. Reconnect the electrical connector and test drain operation before final reassembly.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Maytag error codes: Maytag Error Codes

  • How to Fix Whirlpool Refrigerator Error Er 17F

    How to Fix Whirlpool Refrigerator Error Er 17F

    Problem: Condenser fan undercurrent fault – insufficient current draw indicating open winding

    How to Fix Refrigerator Error

    1. Unplug refrigerator and pull unit away from wall.
    2. Remove rear access panel to access condenser fan motor.
    3. Disconnect fan wiring harness and measure resistance across terminals (should read 50-200 ohms).
    4. If resistance is infinite (open circuit), motor windings have failed.
    5. Inspect motor connector for bent pins or corrosion.
    6. Check wiring harness for broken wires near vibration points.
    7. Verify 120V AC reaches fan connector during compressor operation.
    8. If voltage is present but motor doesn’t run and resistance is infinite, replace condenser fan motor WPW
    9. After replacement, verify fan runs continuously during compressor operation.
    10. Clean condenser coils thoroughly to ensure proper airflow and prevent premature motor failure.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Whirlpool error codes: Whirlpool Error Codes

  • How to Fix Kenmore Dishwasher Error F26

    How to Fix Kenmore Dishwasher Error F26

    Problem: Motor control module communication fault

    How to Fix Dishwasher Error

    1. Reset all control boards by disconnecting power for 15 minutes.
    2. Check motor control harness connections and wiring integrity.
    3. Test communication signals between main control and motor module.
    4. Inspect motor control board for visible damage or component failure.
    5. Replace motor control module if communication cannot be restored.

    As an Amazon Associate, we earn from qualifying purchases through links on this page.

    Still Not Working?

    If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

    Ask a Technician Online – Get Answer in Minutes
    Find a Local Repair Pro Near You



    Browse all Kenmore error codes: Kenmore Error Codes