How to Fix Amana Washer Error F7E6

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: F7E6 Difficulty: Hard

Problem: Motor fault.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix F7E6 Error (Step-by-Step)

Unplug the washer from the power outlet to ensure safety.
Turn off the hot and cold water supplies and confirm the error stays cleared during a full test cycle.
Carefully tilt the washer forward and prop it up securely to access the bottom panel.
Locate the drive motor and remove the drive belt from the motor and tub pulleys.
Disconnect the wire harness connected to the motor and remove the bolts holding the motor in place.
Install the new motor (W10836348), secure it with the bolts, and reconnect the wire harness.
Reinstall the drive belt, then carefully lower the washer back to its upright position and reconnect power and water.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: W10836348

Estimated Market Price: $150-$185

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Amana error codes: Amana Error Codes