⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F7E3 Difficulty: Hard
Problem: Related to overcurrent or undercurrent from the motor, potentially due to a defective wash plate.
How to Fix F7E3 Error (Step-by-Step)
- Disconnect the washer from the electrical outlet to ensure your safety.
- Turn off the water supply to the washer and confirm the error stays cleared during a full test cycle.
- Remove the wash plate cap and the central bolt holding the wash plate in place.
- Lift the wash plate out of the tub and inspect it for any cracks, warping, or damage to the splines on the underside.
- Also, check for any foreign objects that may have become lodged underneath the wash plate, causing it to bind.
- If the wash plate is damaged, it will need to be replaced. If it appears to be in good condition, the issue is likely with the main control board, which is a more complex repair.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- W11578571
- W11603811
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply