How to Fix Amana Washer Error F7 E7

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: F7 E7 Difficulty: Hard

Problem: Motor Unable to Reach Target RPM

⚖️ Repair Decision

❌ NOT WORTH FIXING

Parts over $250

How to Fix F7 E7 Error (Step-by-Step)

Disconnect the washer from its power source to prevent electrical shock.
Access the electronic control board by removing the top panel or the console, usually held by screws at the back or sides.
Take a clear picture of the wire connections on the old board before disconnecting anything.
Carefully unplug all the wire harnesses from the old control board. Note any locking tabs that need to be released.
Remove the mounting screws that hold the control board in its housing and lift it out.
Place the new control board (Part: W11170317 or W10785628) into the housing and secure it with the screws.
Using your photo as a guide, reconnect all wire harnesses to the correct terminals on the new board, then reassemble the console and plug in the washer.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: W10785628 (Electronic Control Board)

Estimated Market Price: $200-$310

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.