⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F7 E7 Difficulty: Hard
Problem: Motor Unable to Reach Target RPM
How to Fix F7 E7 Error (Step-by-Step)
- Ensure the washer is unplugged from the power source and confirm the error stays cleared during a full test cycle.
- Check for any items stuck between the inner and outer tubs that could be preventing the basket from spinning freely.
- If the basket is clear, tilt the machine back to inspect the drive components.
- Examine the drive belt (part WP8183196) for excessive wear or damage. Replace it if it appears loose or worn.
- If the belt is in good condition, the problem may be the drive motor (part W10832724) or the motor capacitor (part W10623547).
- Disconnect the wiring to the motor and remove the mounting bolts to replace it.
- Reassemble all components, return the washer to its standing position, and plug it in to test.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- W10832724
- WP8183196
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply