Skip to main content
Appliance Fix Guide

GE Refrigerator error code

GE Refrigerator Error THERMISTOR-ALARM-2

Either the freezer or refrigerator thermistor circuit is open. The freezer or refrigerator indicator

Either the freezer or refrigerator thermistor circuit is open. The freezer or refrigerator indicator light shows and temperature indicators 4 through 7 turn on in sequence.

HardStart with 5-15 minutes of safe checks
✅ WORTH FIXINGParts under $100
GE refrigerator repair guide for error THERMISTOR-ALARM-2
Error codeTHERMISTOR-ALARM-2Refrigerator

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Unplug the refrigerator from the wall outlet to

    Unplug the refrigerator from the wall outlet to completely disconnect the power and ensure your safety.

  2. 2
    Identify whether the alarm is for the freezer

    Identify whether the alarm is for the freezer or refrigerator thermistor and locate the component. It is typically behind an interior panel in the corresponding compartment.

  3. 3
    Remove the screws or release the clips holding

    Remove the screws or release the clips holding the interior panel to gain access to the thermistor.

A quick explanation

What does THERMISTOR-ALARM-2 mean?

Either the freezer or refrigerator thermistor circuit is open. The freezer or refrigerator indicator light shows and temperature indicators 4 through 7 turn on in sequence.

The answer you came for

How to fix GE refrigerator error THERMISTOR-ALARM-2

Start with the safest checks and work from simple to technical.

  1. 1

    Unplug the refrigerator from the wall outlet to

    Unplug the refrigerator from the wall outlet to completely disconnect the power and ensure your safety.

  2. 2

    Identify whether the alarm is for the freezer

    Identify whether the alarm is for the freezer or refrigerator thermistor and locate the component. It is typically behind an interior panel in the corresponding compartment.

  3. 3

    Remove the screws or release the clips holding

    Remove the screws or release the clips holding the interior panel to gain access to the thermistor.

  4. 4

    Carefully disconnect the wire harness that attaches the

    Carefully disconnect the wire harness that attaches the old thermistor to the refrigerator's wiring.

  5. 5

    Remove the faulty thermistor from its mounting clip

    Remove the faulty thermistor from its mounting clip or housing.

  6. 6

    Secure the new thermistor into the mounting clip

    Secure the new thermistor into the mounting clip and reconnect the wire harness firmly.

  7. 7

    Reinstall the interior panel, ensuring it is properly

    Reinstall the interior panel, ensuring it is properly secured, and then plug the refrigerator back into the power outlet.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix THERMISTOR ALARM Error (Step-by-Step) Unplug the refrigerator from the wall outlet to completely disconnect the power and ensure your safety.Identify whether the alarm is for the freezer or refrigerator thermistor and locate the component. It is typically behind an interior panel in the corresponding compartment.Remove the screws or release the clips holding the interior panel to gain access to the thermistor.Carefully disconnect the wire harness that attaches the old thermistor to the refrigerator's wiring.Remove the faulty thermistor from its mounting clip or housing.Secure the new thermistor into the mounting clip and reconnect the wire harness firmly.Reinstall the interior panel, ensuring it is properly secured, and then plug the refrigerator back into the power outlet.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Refrigerator Focused repair path: refrigerator door, airflow, thermistor, defrost, fan, compressor start, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Confirm the doors seal, the interior lights shut off, and vents are not blocked before replacing sensors or boards. Look for frost pattern clues, stalled fans, warm compartments, water or ice symptoms, and recent power interruptions. For temperature faults, inspect the evaporator fan, thermistor, defrost path, damper, condenser airflow, and board connectors. Use the complete Amana refrigerator model number before ordering sensors, fans, boards, dampers, valves, or start components. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W10316760

Price noted in the current guide: $12-$55

Why this part is shown: It is associated with GE Refrigerator error THERMISTOR-ALARM-2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete refrigerator model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your refrigerator?

If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the GE Refrigerator Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.