⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: ER Difficulty: Hard
Problem: General error code. The specific fault is usually identified by a secondary code.
How to Fix ER Error (Step-by-Step)
- Unplug the refrigerator from the power outlet and confirm the error stays cleared during a full test cycle.
- Locate the main control board, typically on the back of the unit behind an access panel.
- Take a photo of the wire connections to the control board for reference.
- Carefully disconnect all the wiring harnesses from the old control board.
- Remove the screws or release the clips holding the control board in place and remove it.
- Install the new control board and secure it with the screws or clips.
- Reconnect all the wiring harnesses to the new board, using your photo as a guide, and then restore power to the refrigerator.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply