⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: E3 Difficulty: Moderate
Problem: Refrigerator Condenser Fan Error.
How to Fix E3 Error (Step-by-Step)
- Disconnect the refrigerator from the wall outlet and confirm the error stays cleared during a full test cycle.
- Carefully pull the refrigerator away from the wall to access the rear panel.
- Using a screwdriver or nut driver, remove the screws holding the lower rear access panel in place.
- Locate the condenser fan motor, which is near the compressor at the bottom of the refrigerator.
- Unplug the wire harness connected to the fan motor and confirm the error stays cleared during a full test cycle.
- Remove the screws that mount the fan motor and its bracket to the refrigerator frame. You may also need to slide a fan blade off the motor shaft.
- Install the new condenser fan motor, reattach the fan blade, secure it with the mounting screws, reconnect the wiring, and replace the rear access panel.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply