How to Fix Amana Refrigerator Error DR

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: DR Difficulty: Moderate

Problem: Door Switch Problem or Door Not Closing Properly.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix DR Error (Step-by-Step)

Disconnect the refrigerator from its power source and confirm the error stays cleared during a full test cycle.
Locate the door switch, which is typically a small plunger-style switch located in the door frame.
Use a putty knife or a small flathead screwdriver to gently pry the old switch out of the door frame.
Disconnect the two wires attached to the back of the old switch.
Connect the wires to the terminals on the new door switch.
Carefully press the new switch into the opening in the door frame until it snaps into place.
Reconnect the refrigerator to power and test the new switch by opening and closing the door to see if the interior light turns on and off.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: Door Switch: W11384469

Estimated Market Price: $4-$32

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Amana error codes: Amana Error Codes