How to Fix Amana Dryer Error PF

Error Code: PF Difficulty: Hard

Problem: A power failure has occurred, interrupting the drying cycle.

How to Fix PF Error (Step-by-Step)

1. First, confirm the dryer’s outlet is receiving power. Unplug the dryer and test the outlet by plugging in a small lamp or phone charger that you know is working.
2. If the outlet is dead, go to your home’s main electrical panel and check for a tripped circuit breaker or a blown fuse for the dryer. Reset the breaker by flipping it completely off and then back on, or replace the fuse if necessary.
3. If the outlet has power, the next step requires you to UNPLUG THE DRYER. Safety is critical.
4. On the back of the dryer, remove the small metal plate that covers where the power cord connects to the machine. This is the terminal block.
5. Visually inspect the wire connections on the terminal block. Look for any loose screws, broken wires, or signs of black scorching or melting. If a screw is loose, tighten it securely. If there is visible damage, the terminal block and power cord may need to be replaced.
6. If the terminal block and power cord connections are secure and look clean, the power failure is likely due to an internal component failure, such as the main control board.
7. Replacing internal electronic components requires specialized tools and knowledge. It is recommended to contact a certified appliance service to diagnose and replace the faulty part.
8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Next Steps and Parts

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.