⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F71 Difficulty: Moderate
Problem: General error requiring a power cycle.
How to Fix F71 Error (Step-by-Step)
- First, attempt to clear the error by unplugging the dryer from the power outlet.
- Wait for 5 minutes to allow the internal electronics to fully reset.
- Plug the dryer back in and attempt to run a cycle. If the code reappears, the main control board may be faulty.
- To replace it, unplug the dryer again and locate the main control board, typically behind the top or rear panel.
- Carefully disconnect all wire harnesses connected to the old board, taking a picture beforehand for reference.
- Remove the screws holding the board in place and install the new control board (part W10803582 or W11116494).
- Securely reconnect all wire harnesses to the new board, reassemble the dryer, and test its operation.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- W11116494
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply