How to Fix Amana Dryer Error F3E6

Error Code: F3E6 Difficulty: Moderate

Problem: Moisture sensor error.

How to Fix F3E6 Error (Step-by-Step)

1. Unplug the dryer from the electrical outlet for safety and confirm the error stays cleared during a full test cycle.
2. Open the dryer door and locate the two metal moisture sensor strips inside the drum, usually near the lint filter housing.
3. Vigorously clean the surface of both metal strips with a cotton ball or cloth soaked in rubbing alcohol. This removes any built-up residue from dryer sheets or fabric softeners, which can prevent them from sensing moisture correctly.
4. Inspect the wires connected to the back of the sensor strips. Ensure they are securely attached and not broken or corroded.
5. If the error persists after thorough cleaning, the sensor itself may have failed and requires replacement, which may need a professional service.
6. Turn the appliance off, wait about 2 minutes, then turn it back on.
7. Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Amana error codes: Amana Error Codes