⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F3E5 Difficulty: Hard
Problem: The moisture sensor has not detected any data for five consecutive loads.
How to Fix F3E5 Error (Step-by-Step)
- Unplug the dryer from its power source and confirm the error stays cleared during a full test cycle.
- Open the dryer door to access the lint filter area where the moisture sensor strips are located.
- Use a small screwdriver to carefully remove the old sensor strips from their plastic housing.
- Clean the mounting area thoroughly with rubbing alcohol and a clean cloth to remove any residue.
- Firmly press the new moisture sensor strips into place until they click and are seated securely.
- After installation, plug the dryer back in and run a small, damp load to test the new sensors.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- W11537223
- WPW10541265
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply