How to Fix Amana Dryer Error F20

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: F20 Difficulty: Hard

Problem: No voltage detected at the heater relay.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix F20 Error (Step-by-Step)

Unplug the dryer from the electrical outlet to ensure safety.
Access the back of the dryer by removing the rear panel.
Locate the heater relay, which is usually a small, black box with wires connected to it.
Use a multimeter to test the old relay for continuity. If there is no continuity, the relay is faulty.
Disconnect the wires from the old relay and remove it from its mounting bracket.
Install the new heater relay and securely connect the wires.
Reattach the rear panel and plug the dryer back into the power outlet.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: WP8544771

Estimated Market Price: $80-$110

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Amana error codes: Amana Error Codes