How to Fix Amana Dryer Error 3 BEEPS

Error Code: 3 BEEPS Difficulty: Moderate

Problem: Can indicate a variety of issues, including a problem with the door switch or water getting into the control panel.

How to Fix 3 BEEPS Error (Step-by-Step)

1. Unplug the dryer from the power outlet to prevent electrical shock during the repair.
2. Open the dryer door and locate the door switch. It’s a small button or lever that the door presses when it closes.
3. To inspect the switch more closely, you may need to prop open the top of the dryer or remove the front panel, depending on your model.
4. Disconnect the wires from the door switch terminals. Use a multimeter set to continuity to test the switch. The meter should show continuity when the button is pressed and no continuity when released.
5. If the switch fails the test, replace it with a new one by securing it in place and reconnecting the wires.
6. Reassemble the dryer, plug it back in, and check if the beeping issue is resolved.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.

Next Steps and Parts

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.