How to Fix Amana Dishwasher Error H2O

Error Code: H2O Difficulty: Moderate

Problem: Water supply issue. The dishwasher is not receiving enough water or any water at all.

How to Fix H2O Error (Step-by-Step)

1. Locate the hot water supply valve for the dishwasher, which is usually under the kitchen sink, and make sure it is turned completely on (counter-clockwise).
2. Check the water supply hose that connects the valve to the dishwasher. Ensure it is not bent, kinked, or crushed, which would restrict water flow.
3. Turn off the power to the dishwasher at the circuit breaker and turn off the water supply valve.
4. Place a shallow pan or towel under the water inlet valve connection on the dishwasher. Disconnect the supply hose from the dishwasher.
5. Check the small screen filter inside the connection port on the dishwasher’s water inlet valve. If it is clogged with sediment or debris, clean it gently with a small brush.
6. If the filter is clean and the hose is clear, the water inlet valve itself may be faulty and require replacement.
7. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Browse all Amana error codes: Amana Error Codes