⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F5E2 Difficulty: Moderate
Problem: Indicates the door is not locking properly.
How to Fix F5E2 Error (Step-by-Step)
- Cut all power to the appliance by flipping the corresponding circuit breaker to the ‘OFF’ position.
- Open the dishwasher door and, using a screwdriver, remove the screws around the edge of the inner door liner.
- Carefully separate the inner and outer door panels to get access to the components inside.
- Identify the door latch assembly (Parts WPW10130695, W10862259) at the very top of the door.
- Disconnect the electrical plug going to the latch. Then, remove the screws that mount the latch to the door frame.
- Install the new latch assembly, secure it with the mounting screws, and plug the wire harness back in.
- Reattach the inner door panel, restore power, and confirm the door now closes and locks securely.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- WPW10130695
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply