Skip to main content
Appliance Fix Guide

Amana Dishwasher error code

Amana Dishwasher Error 2-2

Control detected stuck key(s) in keypad or keypad connection.

Control detected stuck key(s) in keypad or keypad connection.

Updated Aug 18, 2026
informationalno_parts
Amana dishwasher repair guide for error 2-2
Error code2-2Dishwasher

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Inspect for Stuck Keys: Carefully examine the control panel for any buttons that appear to be stuck or depressed.

  2. 2
    Check 2

    Clean the Panel: Wipe down the control panel with a soft, damp cloth to remove any dirt or residue that might be interfering with button operation.

  3. 3
    Check 3

    Power Reset: Turn off the dishwasher at the circuit breaker for a few minutes to reset the electronics.

A quick explanation

What does 2-2 mean?

Control detected stuck key(s) in keypad or keypad connection.

The answer you came for

How to fix Amana dishwasher error 2-2

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Turn off the power to the dishwasher at your home's circuit breaker panel to ensure safety.

  2. 2

    Step 2

    2. Open the dishwasher door and remove the screws holding the inner door panel to the outer door panel. These are typically located around the perimeter of the inner panel.

  3. 3

    Step 3

    3. Carefully separate the inner and outer door panels to expose the control panel and its wiring. Take a photo of the wire connections to the control panel for reference.

  4. 4

    Step 4

    4. Disconnect the ribbon cable or wire harness that connects the keypad to the main control board. There may be a small locking tab on the connector that needs to be gently released.

  5. 5

    Step 5

    5. Remove the screws or release the clips holding the old control panel/keypad assembly in place and carefully remove it from the door.

  6. 6

    Step 6

    6. Position the new control panel in the door, secure it with its screws or clips, and reconnect the wire harness to the main control board, using your photo as a guide.

  7. 7

    Step 7

    7. Reassemble the inner and outer door panels, secure them with the screws, restore power at the circuit breaker, and run a test cycle to confirm the fix.

Read the additional checks from the current guide

How to Fix 2-2 Error (Step-by-Step) Turn off the power to the dishwasher at your home's circuit breaker panel to ensure safety.Open the dishwasher door and remove the screws holding the inner door panel to the outer door panel. These are typically located around the perimeter of the inner panel.Carefully separate the inner and outer door panels to expose the control panel and its wiring. Take a photo of the wire connections to the control panel for reference.Disconnect the ribbon cable or wire harness that connects the keypad to the main control board. There may be a small locking tab on the connector that needs to be gently released.Remove the screws or release the clips holding the old control panel/keypad assembly in place and carefully remove it from the door.Position the new control panel in the door, secure it with its screws or clips, and reconnect the wire harness to the main control board, using your photo as a guide.Reassemble the inner and outer door panels, secure them with the screws, restore power at the circuit breaker, and run a test cycle to confirm the fix.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dishwasher Focused repair path: dishwasher fill, drain, wash motor, heating, leak, sensor, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before opening panels, then confirm the door latch, float, inlet valve, drain path, and harness connections are seated. Match the timing of the failure to the likely path: fill, wash circulation, drain, heat, leak detection, or control communication. Clear debris from filters, sump areas, spray arms, and the drain loop before treating the fault as a failed board. If a part is suspected, verify voltage or continuity where appropriate and match the complete Amana dishwasher model number before ordering. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Amana dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Whirlpool dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by complete Amana dishwasher model number. Confirm compatibility before buying. Why this category can matter: standing-water, drain, and no-complete-cycle symptoms after the filter and hose are checked. Search Amazon for Whirlpool dishwasher drain pump Whirlpool dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by complete Amana dishwasher model number. Confirm compatibility before buying. Why this category can matter: fill, low-water, or no-water symptoms after supply and float checks. Search Amazon for Whirlpool dishwasher water inlet valve Whirlpool dishwasher control board Common replacement category: Electronic control board Fit note: Exact OEM part number varies by complete Amana dishwasher model number. Confirm compatibility before buying. Why this category can matter: repeating error-code or control faults after wiring and latch checks. Search Amazon for Whirlpool dishwasher control board Before ordering: match the part to the complete Amana dishwasher model number on the appliance tag.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Stuck button on the control panel
  • Debris or residue interfering with button operation
  • Faulty control panel or keypad assembly

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Amana Dishwasher error 2-2 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your dishwasher?

If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Amana Dishwasher Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.