How to Fix Whirlpool Refrigerator Error Er 17F

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Easy

Problem: Condenser fan undercurrent fault – insufficient current draw indicating open winding

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix Refrigerator Error

Unplug refrigerator and pull unit away from wall.
Remove rear access panel to access condenser fan motor.
Disconnect fan wiring harness and measure resistance across terminals (should read 50-200 ohms).
If resistance is infinite (open circuit), motor windings have failed.
Inspect motor connector for bent pins or corrosion.
Check wiring harness for broken wires near vibration points.
Verify 120V AC reaches fan connector during compressor operation.
If voltage is present but motor doesn’t run and resistance is infinite, replace condenser fan motor WPW
After replacement, verify fan runs continuously during compressor operation.
Clean condenser coils thoroughly to ensure proper airflow and prevent premature motor failure.

As an Amazon Associate, we earn from qualifying purchases through links on this page.

OEM Part #: WPW10617423

Estimated Market Price: $35

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Whirlpool error codes: Whirlpool Error Codes