How to Fix Whirlpool Refrigerator Error Er 6C

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Refrigerator Difficulty: Hard

Problem: Inverter communication timeout with main control board

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Refrigerator Error

Unplug refrigerator for 5 minutes to reset communication bus.
Remove rear access panel to access main control board and inverter board.
Locate 4-wire communication harness between main control board and inverter.
Disconnect and reconnect harness at both ends, inspecting for bent pins or corrosion.
Check harness routing for pinch points between cabinet panels or near sharp edges.
Verify continuity on all 4 wires between connectors (no opens or shorts to ground).
Inspect both boards for moisture damage or burnt components near communication ports.
If harness tests good but error persists, replace inverter assembly W11338877 first.
If Er 6C returns after inverter replacement, replace main control board W
After repair, enter diagnostic mode and verify inverter status shows ‘COMM OK’ during operation.

OEM Part #: W11035831

Estimated Market Price: $240

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.