How to Fix Whirlpool Washer Error F2E3

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Washer Difficulty: Moderate

Problem: User interface communication error – no response from control panel

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Washer Error

Unplug washer for 2 minutes to reset communication bus.
Remove top panel to access main control board (CCU) connections.
Locate ribbon cable or multi-wire harness connecting CCU to user interface/display board.
Disconnect and reconnect harness at both ends, inspecting for bent pins or corrosion.
Check harness routing for pinch points between cabinet panels or near sharp edges.
Verify continuity on all pins between CCU and interface connectors (no opens or shorts).
Inspect interface board for moisture damage or burnt components near communication IC.
Verify 5V DC power reaches interface board from CCU (test at connector pins).
If harness tests good but error persists, replace user interface assembly W
After replacement, verify all display functions and button responses operate correctly through diagnostic mode.

OEM Part #: W10870600

Estimated Market Price: $145

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Whirlpool error codes: Whirlpool Error Codes