How to Fix Whirlpool Washer Error F0E4

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: Washer Difficulty: Moderate

Problem: Shifter position error – transmission not in correct position for selected cycle

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix Washer Error

Unplug washer and remove front lower panel.
Locate shifter assembly mounted between transmission and tub (Cabrio models).
Manually move shifter lever between wash/spin positions – should move smoothly without binding.
Inspect shifter linkage for bent components, excessive play, or disconnected rods.
Disconnect shifter wiring harness and measure resistance across position sensor (should be 1000-2000 ohms).
Verify 120V AC reaches shifter during mode change (test at connector during cycle transition).
Check transmission input shaft for smooth rotation in both directions without grinding.
Inspect tub for foreign objects jamming transmission engagement.
If shifter doesn’t move when powered or position sensor readings are erratic, replace shifter assembly W
After replacement, verify washer agitates during wash cycle and spins during spin cycle without hesitation or error codes.

OEM Part #: W10820039

Estimated Market Price: $110

If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Get the ‘Secret Service Mode’ Cheat Sheet for your Whirlpool model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

EPA Section 608 Certified Technician with 18+ years experience.