Skip to main content
Appliance Fix Guide

Whirlpool Washer error code

Whirlpool Washer Error F13

Unplug washer for 10 minutes to fully discharge board capacitors.

Unplug washer for 10 minutes to fully discharge board capacitors.

HardStart with 5-15 minutes of safe checks
⚠️ CHECK WARRANTY / AGE$100 - $250 Range
Whirlpool washer repair guide for error F13
Error codeF13Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Unplug washer for 10 minutes to fully discharge

    Unplug washer for 10 minutes to fully discharge board capacitors.

  2. 2
    Remove top panel and locate main control board

    Remove top panel and locate main control board (CCU).

  3. 3
    Inspect board for visible damage

    Inspect board for visible damage: burnt components, bulging capacitors, or moisture corrosion.

A quick explanation

What does F13 mean?

Unplug washer for 10 minutes to fully discharge board capacitors.

The answer you came for

How to fix Whirlpool washer error F13

Start with the safest checks and work from simple to technical.

  1. 1

    Unplug washer for 10 minutes to fully discharge

    Unplug washer for 10 minutes to fully discharge board capacitors.

  2. 2

    Remove top panel and locate main control board

    Remove top panel and locate main control board (CCU).

  3. 3

    Inspect board for visible damage

    Inspect board for visible damage: burnt components, bulging capacitors, or moisture corrosion.

  4. 4

    Check all wire harness connections for proper seating

    Check all wire harness connections for proper seating and corrosion.

  5. 5

    Verify 120V AC power supply to board is

    Verify 120V AC power supply to board is stable (no voltage sags during operation).

  6. 6

    If board appears physically intact but error persists

    If board appears physically intact but error persists after power cycle, EEPROM corruption has occurred.

  7. 7

    Main control board must be replaced - EEPROM

    Main control board must be replaced - EEPROM cannot be reprogrammed in field.

  8. 8

    Install new CCU W10461397 and secure all mounting

    Install new CCU W10461397 and secure all mounting screws to prevent vibration damage.

  9. 9

    After installation, run full diagnostic cycle to verify

    After installation, run full diagnostic cycle to verify all functions operate correctly.

  10. 10

    Note

    Note: Power surges often cause this failure - recommend installing whole-house surge protector.

  11. 11

    Whirlpool part search

    Whirlpool part search: W10461397 Estimated part range: $220 Fit note: Confirm this part against the full Whirlpool washer model number before buying. Search Amazon for W10461397

Read the additional checks from the current guide

How to Fix Washer Error Unplug washer for 10 minutes to fully discharge board capacitors.Remove top panel and locate main control board (CCU).Inspect board for visible damage: burnt components, bulging capacitors, or moisture corrosion.Check all wire harness connections for proper seating and corrosion.Verify 120V AC power supply to board is stable (no voltage sags during operation).If board appears physically intact but error persists after power cycle, EEPROM corruption has occurred.Main control board must be replaced - EEPROM cannot be reprogrammed in field.Install new CCU W10461397 and secure all mounting screws to prevent vibration damage.After installation, run full diagnostic cycle to verify all functions operate correctly.Note: Power surges often cause this failure - recommend installing whole-house surge protector. As an Amazon Associate, we earn from qualifying purchases through links on this page. Recommended Parts to Check This page already had a Whirlpool part recommendation. Verify the complete appliance model number before ordering, because part fit can vary by model revision. Whirlpool part search: W10461397 Estimated part range: $220 Fit note: Confirm this part against the full Whirlpool washer model number before buying. Search Amazon for W10461397

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

No replacement part recommended for this code

The researched guidance for Whirlpool Washer error F13 points to user-action and diagnostic steps above rather than a mapped replacement part. We will not invent a part or send you to an unrelated product.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Whirlpool Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.