Skip to main content
Appliance Fix Guide

Bosch Dryer error code

Bosch Dryer Error E-60-2B-2

Unbalanced load detected.

Unbalanced load detected.

Updated Aug 18, 2026
informationalno_parts
Bosch dryer repair guide for error E-60-2B-2
Error codeE-60-2B-2Dryer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Thoroughly clean the lint filter and the condenser unit to ensure proper airflow.

  2. 2
    Check 2

    Inspect the dryer's air intake and exhaust vents for any obstructions.

  3. 3
    Check 3

    If accessible, check the NTC temperature sensor for any visible damage or debris.

A quick explanation

What does E-60-2B-2 mean?

Unbalanced load detected.

The answer you came for

How to fix Bosch dryer error E-60-2B-2

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the dryer from the wall outlet to ensure your safety.

  2. 2

    Step 2

    2. Open the dryer door and inspect the laundry inside. Large, heavy items like sheets or towels can get tangled into a ball, causing the drum to spin unevenly. Unravel any tangled items and redistribute the load evenly inside the drum.

  3. 3

    Step 3

    3. Close the door, plug the dryer back in, and attempt to start a new cycle. If the error is gone, the issue was the laundry load itself.

  4. 4

    Step 4

    4. If the error code returns, the machine's control system may be receiving a false signal. Unplug the dryer again and prepare to access the internal components by removing the rear access panel, which is typically held in place by several screws.

  5. 5

    Step 5

    5. Locate the heating element assembly. You will see the high-limit thermostat (Part 00600157) mounted on this housing. Disconnect the two wires attached to it and remove the mounting screws. Install the new thermostat, ensuring both the screws and wires are securely reconnected.

  6. 6

    Step 6

    6. Next, replace the main heating element (Part 12035776). Disconnect the wires leading to the element terminals. Remove the screws securing the element to its housing, slide the old element out, and insert the new one. Secure it with the screws and reattach the wiring exactly as it was before.

  7. 7

    Step 7

    7. Carefully re-install the rear access panel, ensuring all screws are tightened. Plug the dryer back into the power outlet and run a test cycle to confirm the error is cleared.

Read the additional checks from the current guide

How to Fix E:60 -2B Error (Step-by-Step) Unplug the dryer from the wall outlet to ensure your safety.Open the dryer door and inspect the laundry inside. Large, heavy items like sheets or towels can get tangled into a ball, causing the drum to spin unevenly. Unravel any tangled items and redistribute the load evenly inside the drum.Close the door, plug the dryer back in, and attempt to start a new cycle. If the error is gone, the issue was the laundry load itself.Locate the heating element assembly. You will see the high-limit thermostat (Part 00600157) mounted on this housing. Disconnect the two wires attached to it and remove the mounting screws. Install the new thermostat, ensuring both the screws and wires are securely reconnected.Next, replace the main heating element (Part 12035776). Disconnect the wires leading to the element terminals. Remove the screws securing the element to its housing, slide the old element out, and insert the new one. Secure it with the screws and reattach the wiring exactly as it was before.Carefully re-install the rear access panel, ensuring all screws are tightened. Plug the dryer back into the power outlet and run a test cycle to confirm the error is cleared.Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure.

What to Check Next on This Bosch Dryer Use these checks before ordering parts for Bosch dryer E:60 -2B. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive. Recommended Parts to CheckBosch dryer part numbers vary by model. These are model-number-safe part-category searches, not universal fit claims.Dryer lint screenCommon replacement category: lint filterFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Start with lint restrictions when heating, airflow, or maintenance warnings appear.Search Amazon for Dryer lint screenDryer thermal fuseCommon replacement category: thermal protectionFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Common safety device to inspect after overheating or no-heat symptoms.Search Amazon for Dryer thermal fuseDryer drum beltCommon replacement category: drive systemFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Worth checking when the dryer tumbles poorly, stalls, or makes drive noise.Search Amazon for Dryer drum beltDryer moisture sensorCommon replacement category: sensor circuitFit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.Why check it: Useful category to verify when dryness or care/maintenance messages persist.Search Amazon for Dryer moisture sensorBefore ordering: match the part to the complete model number on the appliance tag. Browse all Bosch error codes: Bosch Error Codes

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Problem related to the heating system or internal ventilation.
  • Defective or disconnected heating element.
  • Damaged or dirty NTC temperature sensor.
  • Blockage of airflow due to clogged filters or ducts.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 12035776

Price noted in the current guide: $145-$170

Why this part is shown: It is associated with Bosch Dryer error E-60-2B-2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dryer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dryer?

If repairing this dryer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Bosch Dryer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.