How to Fix Electrolux Refrigerator Error LOW VOLTAGE WARNING

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: LOW VOLTAGE WARNING Difficulty: Easy

Problem: The power supply to the appliance has dropped below 170V.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix LOW VOLTAGE WARNING Error (Step-by-Step)

First, check the circuit breaker for your kitchen in your home’s electrical panel. Reset the breaker if it has tripped.
Ensure the refrigerator’s power cord is securely plugged into the wall outlet. Unplug it and plug it back in to be certain.
Remove any other appliances or devices that are plugged into the same electrical circuit as the refrigerator to avoid overloading it.
Test the wall outlet by plugging in a small, known-working device like a lamp to confirm the outlet has power.
This warning can sometimes appear during a ‘brownout’ or a period of unstable power from your utility provider. Wait for a few hours to see if the power supply stabilizes.
If the warning persists and other devices work in the outlet, there may be an issue with the home’s wiring that requires an electrician.
Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes