Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error E0

This code is not consistently defined across sources, but generally points to an issue with a pressure switch or water level sensor.

This code is not consistently defined across sources, but generally points to an issue with a pressure switch or water level sensor.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Electrolux washer repair guide for error E0
Error codeE0Washer

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Power Cycle: Turn the washer off and unplug it for several minutes before plugging it back in.

  2. 2
    Check 2

    Check Pressure Switch Connections: Inspect the wiring and connector on the water level pressure switch to ensure they are secure.

  3. 3
    Check 3

    Inspect Air Hose: Check the air hose that connects to the pressure switch for any blockages, kinks, or damage.

A quick explanation

What does E0 mean?

This code is not consistently defined across sources, but generally points to an issue with a pressure switch or water level sensor.

The answer you came for

How to fix Electrolux washer error E0

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Unplug the washing machine from the wall outlet and turn off both hot and cold water supply valves.

  2. 2

    Step 2

    2. Slide the washer forward to access the top panel. Remove the screws holding the top panel in place and lift it off.

  3. 3

    Step 3

    3. Locate the water level pressure switch. It is a small, round part with a thin hose and an electrical connector attached.

  4. 4

    Step 4

    4. Carefully disconnect the electrical wire harness from the switch by pressing the release tab.

  5. 5

    Step 5

    5. Gently pull the thin rubber tube off of the switch's port.

  6. 6

    Step 6

    6. Replace the old switch with the new one, ensuring you securely reconnect both the rubber tube and the electrical harness.

  7. 7

    Step 7

    7. Reattach the top panel, plug the washer back in, turn on the water, and run a test cycle.

Read the additional checks from the current guide

How to Fix E0 Error (Step-by-Step) Unplug the washing machine from the wall outlet and turn off both hot and cold water supply valves.Slide the washer forward to access the top panel. Remove the screws holding the top panel in place and lift it off.Locate the water level pressure switch. It is a small, round part with a thin hose and an electrical connector attached.Carefully disconnect the electrical wire harness from the switch by pressing the release tab.Gently pull the thin rubber tube off of the switch's port.Replace the old switch with the new one, ensuring you securely reconnect both the rubber tube and the electrical harness.Reattach the top panel, plug the washer back in, turn on the water, and run a test cycle.Turn the appliance off, wait about 2 minutes, then turn it back on. Verified Compatible Alternatives:134762010 Still Not Working? If the replacement part didn't fix the issue, you may have a wiring problem or main board failure.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Faulty water level pressure switch
  • Loose wiring or connections to the pressure switch
  • Blocked, kinked, or damaged air hose connected to the pressure switch

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134762000

Price noted in the current guide: $25-$85

Why this part is shown: It is associated with Electrolux Washer error E0 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.