Error Code: CLEAN COIL Difficulty: Easy
Problem: The condenser coil needs to be cleaned. This indicator light comes on after 3 months of elapsed time as a reminder.
How to Fix CLEAN COIL Error (Step-by-Step)
- Unplug the refrigerator from the electrical outlet for safety and confirm the error stays cleared during a full test cycle.
- Locate the condenser coils, which are usually at the bottom of the refrigerator, behind the front kickplate grille or on the back.
- Remove the grille or access panel. The grille may pull straight off or be secured with screws.
- Use a coil cleaning brush and a vacuum cleaner with a hose attachment to gently clean the dust and debris from the coils.
- Be sure to clean the coils thoroughly, as well as the area around the condenser fan.
- Replace the grille or access panel and confirm the error stays cleared during a full test cycle.
- Plug the refrigerator back in and press any necessary reset button on the control panel to clear the reminder.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Parts to Check
No exact official OEM part number is listed here because the correct Amana refrigerator part can vary by complete model number. These are targeted part-category searches, not universal fit claims.
-
Whirlpool refrigerator thermistorCommon replacement category: Temperature sensor / thermistorFit note: Exact OEM part number varies by complete Amana refrigerator model number. Confirm compatibility before buying.Why this category can matter: temperature, cooling, or alarm symptoms after vent and setting checks.
-
Whirlpool refrigerator evaporator fan motorCommon replacement category: Evaporator fan motorFit note: Exact OEM part number varies by complete Amana refrigerator model number. Confirm compatibility before buying.Why this category can matter: airflow and uneven-cooling symptoms after frost and obstruction checks.
Search Amazon for Whirlpool refrigerator evaporator fan motor
-
Whirlpool refrigerator control boardCommon replacement category: Electronic control boardFit note: Exact OEM part number varies by complete Amana refrigerator model number. Confirm compatibility before buying.Why this category can matter: repeating electronic or cooling-control faults after power and wiring checks.
Before ordering: match the part to the complete Amana refrigerator model number on the appliance tag.
When It’s Better to Replace Than Repair
Refrigerator repairs can become costly when sealed-system, control, defrost, fan, or ice-maker issues repeat.
Confirm width, height, depth, door swing, counter-depth needs, water line, and delivery path before ordering.
For repair parts, verify exact fit with the full refrigerator model number before buying; these links are general replacement-appliance shopping options.
- [OK]Water inlet valve, ice maker, or fan failures keep returning
- [OK]Defrost heater, thermostat, or sensor faults stack up
- [OK]Compressor or sealed-system repair is not economical
- [OK]Food-loss risk is becoming a pattern
Recommended Refrigerator Replacement Options
As an Amazon Associate, we earn from qualifying purchases.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply