Skip to main content
Appliance Fix Guide

Amana Dishwasher error code

Amana Dishwasher Error F15

Virtual sensor error. This relates to a fault in the dishwasher's sensor system.

Virtual sensor error. This relates to a fault in the dishwasher's sensor system.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Amana dishwasher repair guide for error F15
Error codeF15Dishwasher

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Inspect for Blockages: Check if anything in the lower rack is blocking the dispenser door from opening.

  2. 2
    Check 2

    Clean the Dispenser: Clean any caked-on detergent or residue from the dispenser, as this can cause the door to stick.

  3. 3
    Check 3

    Check Dispenser Lid and Spring: Ensure the dispenser lid and its spring are intact and functioning correctly.

A quick explanation

What does F15 mean?

Virtual sensor error. This relates to a fault in the dishwasher's sensor system.

The answer you came for

How to fix Amana dishwasher error F15

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the dishwasher from its power source at the circuit breaker.

  2. 2

    Step 2

    2. You will likely need to pull the dishwasher out from under the counter to access the sensor.

  3. 3

    Step 3

    3. The virtual sensor (W11705151) is part of the sump assembly at the bottom of the dishwasher tub. You will need to remove the lower spray arm and the filter assembly to get to it.

  4. 4

    Step 4

    4. Disconnect the wiring harness from the sensor.

  5. 5

    Step 5

    5. The sensor is usually held in place by a locking tab. Release the tab and twist the sensor to remove it.

  6. 6

    Step 6

    6. Install the new sensor, making sure it locks into place, and reconnect the wiring.

  7. 7

    Step 7

    7. Reassemble the filter and spray arm, slide the dishwasher back into place, and restore power.

Read the additional checks from the current guide

How to Fix F15 Error (Step-by-Step) Disconnect the dishwasher from its power source at the circuit breaker.You will likely need to pull the dishwasher out from under the counter to access the sensor.The virtual sensor (W11705151) is part of the sump assembly at the bottom of the dishwasher tub. You will need to remove the lower spray arm and the filter assembly to get to it.Disconnect the wiring harness from the sensor and confirm the error stays cleared during a full test cycle.The sensor is usually held in place by a locking tab. Release the tab and twist the sensor to remove it.Install the new sensor, making sure it locks into place, and reconnect the wiring.Reassemble the filter and spray arm, slide the dishwasher back into place, and restore power.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dishwasher Focused repair path: dishwasher fill, drain, wash motor, heating, leak, sensor, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before opening panels, then confirm the door latch, float, inlet valve, drain path, and harness connections are seated. Match the timing of the failure to the likely path: fill, wash circulation, drain, heat, leak detection, or control communication. Clear debris from filters, sump areas, spray arms, and the drain loop before treating the fault as a failed board. If a part is suspected, verify voltage or continuity where appropriate and match the complete Amana dishwasher model number before ordering. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. Verified Compatible Alternatives:WPW10224430

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Faulty detergent dispenser
  • Dispenser door is blocked
  • Caked-on or old detergent causing the door to stick

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: W11705151

Price noted in the current guide: $50-$85

Why this part is shown: It is associated with Amana Dishwasher error F15 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dishwasher model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dishwasher?

If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Amana Dishwasher Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.