Amana Dishwasher error code
Amana Dishwasher Error F02
Water fill solenoid valve failure. The dishwasher is having a problem with the water inlet valve.
Water fill solenoid valve failure. The dishwasher is having a problem with the water inlet valve.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Ensure the water supply valve under the sink is fully open.
- 2Check 2
Check the water supply line for any kinks or blockages.
- 3Check 3
Turn off the water supply, disconnect the water line from the inlet valve, and clean any debris from the screen inside the valve inlet.
A quick explanation
What does F02 mean?
Water fill solenoid valve failure. The dishwasher is having a problem with the water inlet valve.
The answer you came for
How to fix Amana dishwasher error F02
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Turn off the water supply to the dishwasher. The valve is usually located under the kitchen sink.
- 2
Step 2
2. Disconnect the dishwasher from the electrical power supply at the fuse box or circuit breaker.
- 3
Step 3
3. Place a towel under the water inlet valve to catch any spills. The valve is typically located at the front right or left side, behind the lower access panel.
- 4
Step 4
4. Disconnect the water line and the electrical harness from the valve.
- 5
Step 5
5. Use a multimeter to test the solenoid on the valve for continuity. A reading between 500 and 1500 ohms is typical; a reading outside this range indicates a faulty valve.
- 6
Step 6
6. If the test confirms the valve is bad, replace it with a new one.
- 7
Step 7
7. Reconnect the water and power lines, then turn them back on and check for leaks while the dishwasher fills for a new cycle.
Read the additional checks from the current guide
How to Fix F02 Error (Step-by-Step) Turn off the water supply to the dishwasher. The valve is usually located under the kitchen sink.Disconnect the dishwasher from the electrical power supply at the fuse box or circuit breaker.Place a towel under the water inlet valve to catch any spills. The valve is typically located at the front right or left side, behind the lower access panel.Disconnect the water line and the electrical harness from the valve.Use a multimeter to test the solenoid on the valve for continuity. A reading between 500 and 1500 ohms is typical; a reading outside this range indicates a faulty valve.If the test confirms the valve is bad, replace it with a new one.Reconnect the water and power lines, then turn them back on and check for leaks while the dishwasher fills for a new cycle.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Amana Dishwasher Focused repair path: dishwasher fill, drain, wash motor, heating, leak, sensor, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before opening panels, then confirm the door latch, float, inlet valve, drain path, and harness connections are seated. Match the timing of the failure to the likely path: fill, wash circulation, drain, heat, leak detection, or control communication. Clear debris from filters, sump areas, spray arms, and the drain loop before treating the fault as a failed board. If a part is suspected, verify voltage or continuity where appropriate and match the complete Amana dishwasher model number before ordering. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. Verified Compatible Alternatives:WPW10327249
What may be causing it?
- Faulty water inlet valve
- Clogged screen on the water inlet valve
- Kinked or blocked water supply line
- Water supply valve is not fully open
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: W11082871
Price noted in the current guide: $35-$60
Why this part is shown: It is associated with Amana Dishwasher error F02 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete dishwasher model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your dishwasher?
If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$499
Budget-friendly dishwashers in the $0-$499 range.
Shop Value Options on AmazonBest Overall
$500-$899
Balanced dishwashers in the $500-$899 range.
Shop Best Overall Options on AmazonPremium
$900-$2,000
Higher-end dishwashers in the $900-$2,000 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Amana Dishwasher Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.