Skip to main content
Appliance Fix Guide

GE Refrigerator error code

GE Refrigerator Error D7-AND-D8-ILLUMINATED-4

Main board and refrigerator sensor issue.

Main board and refrigerator sensor issue.

HardStart with 5-15 minutes of safe checks
❌ CONSIDER REPLACINGParts over $250
GE refrigerator repair guide for error D7-AND-D8-ILLUMINATED-4
Error codeD7-AND-D8-ILLUMINATED-4Refrigerator

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Unplug the refrigerator or turn off its circuit

    Unplug the refrigerator or turn off its circuit breaker to cut all power.

  2. 2
    First, replace the refrigerator sensor (D8)

    First, replace the refrigerator sensor (D8). It is located inside the fresh food section, usually along the back or side wall behind a small, vented plastic cover. Pry the cover off.

  3. 3
    Disconnect the wire harness from the old sensor,

    Disconnect the wire harness from the old sensor, remove it, and install the new sensor by connecting its harness and snapping it into place. Re-attach the cover.

A quick explanation

What does D7-AND-D8-ILLUMINATED-4 mean?

Main board and refrigerator sensor issue.

The answer you came for

How to fix GE refrigerator error D7-AND-D8-ILLUMINATED-4

Start with the safest checks and work from simple to technical.

  1. 1

    Unplug the refrigerator or turn off its circuit

    Unplug the refrigerator or turn off its circuit breaker to cut all power.

  2. 2

    First, replace the refrigerator sensor (D8)

    First, replace the refrigerator sensor (D8). It is located inside the fresh food section, usually along the back or side wall behind a small, vented plastic cover. Pry the cover off.

  3. 3

    Disconnect the wire harness from the old sensor,

    Disconnect the wire harness from the old sensor, remove it, and install the new sensor by connecting its harness and snapping it into place. Re-attach the cover.

  4. 4

    If the error persists after powering on, you

    If the error persists after powering on, you must also replace the main control board (D7). This is on the back of the unit behind a service panel.

  5. 5

    Take a photo of the wire connections on

    Take a photo of the wire connections on the board before unplugging them.

  6. 6

    Swap the old board with the new one,

    Swap the old board with the new one, carefully transferring all wire harnesses.

  7. 7

    Reinstall the service panel, restore power, and allow

    Reinstall the service panel, restore power, and allow the system to initialize.

  8. 8

    Turn the appliance off, wait about 2 minutes,

    Turn the appliance off, wait about 2 minutes, then turn it back on.

Read the additional checks from the current guide

How to Fix D7 AND D8 ILLUMINATED Error (Step-by-Step) Unplug the refrigerator or turn off its circuit breaker to cut all power.First, replace the refrigerator sensor (D8). It is located inside the fresh food section, usually along the back or side wall behind a small, vented plastic cover. Pry the cover off.Disconnect the wire harness from the old sensor, remove it, and install the new sensor by connecting its harness and snapping it into place. Re-attach the cover.If the error persists after powering on, you must also replace the main control board (D7). This is on the back of the unit behind a service panel.Take a photo of the wire connections on the board before unplugging them.Swap the old board with the new one, carefully transferring all wire harnesses.Reinstall the service panel, restore power, and allow the system to initialize.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Refrigerator Focused repair path: refrigerator door, airflow, thermistor, defrost, fan, compressor start, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Confirm the doors seal, the interior lights shut off, and vents are not blocked before replacing sensors or boards. Look for frost pattern clues, stalled fans, warm compartments, water or ice symptoms, and recent power interruptions. For temperature faults, inspect the evaporator fan, thermistor, defrost path, damper, condenser airflow, and board connectors. Use the complete Amana refrigerator model number before ordering sensors, fans, boards, dampers, valves, or start components. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model. Verified Compatible Alternatives:WPW10310240WPW10384183

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

Recommended part

Recommended part for this error code

Part listed in the current guide

OEM candidate: W10316760

Price noted in the current guide: $330-$380

Why this part is shown: It is associated with GE Refrigerator error D7-AND-D8-ILLUMINATED-4 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete refrigerator model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your refrigerator?

If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the GE Refrigerator Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.