Skip to main content
Appliance Fix Guide

Amana Dishwasher error code

Amana Dishwasher Error 6-2

Fill valve electrical problem.

Fill valve electrical problem.

Updated Aug 18, 2026
✅ WORTH FIXINGParts under $100
Amana dishwasher repair guide for error 6-2
Error code6-2Dishwasher

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Unplug the dishwasher or turn off the circuit breaker.

  2. 2
    Check 2

    Inspect the wiring connections to the water inlet valve. Ensure they are secure and not corroded.

  3. 3
    Check 3

    If you have a multimeter, you can test the resistance of the fill valve solenoid. An open or out-of-spec reading indicates a faulty valve.

A quick explanation

What does 6-2 mean?

Fill valve electrical problem.

The answer you came for

How to fix Amana dishwasher error 6-2

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Shut off the dishwasher's power supply from your home's fuse box or circuit breaker.

  2. 2

    Step 2

    2. Turn off the hot water supply line connected to the dishwasher.

  3. 3

    Step 3

    3. Access the water inlet valve, which is typically located at the front bottom of the dishwasher, behind a lower access panel.

  4. 4

    Step 4

    4. Carefully disconnect the wiring harness connected to the valve's solenoids.

  5. 5

    Step 5

    5. Inspect the wires and the harness for any signs of burning, corrosion, or loose connections. Reconnect them securely if they appear loose.

  6. 6

    Step 6

    6. If the wiring looks good, the electrical solenoid on the valve has likely failed. The entire valve assembly will need to be replaced.

  7. 7

    Step 7

    7. Disconnect the water lines, remove the old valve, and install the new one, making sure to reconnect all hoses and wires securely.

Read the additional checks from the current guide

How to Fix 6-2 Error (Step-by-Step) Shut off the dishwasher's power supply from your home's fuse box or circuit breaker.Turn off the hot water supply line connected to the dishwasher.Access the water inlet valve, which is typically located at the front bottom of the dishwasher, behind a lower access panel.Carefully disconnect the wiring harness connected to the valve's solenoids.Inspect the wires and the harness for any signs of burning, corrosion, or loose connections. Reconnect them securely if they appear loose.If the wiring looks good, the electrical solenoid on the valve has likely failed. The entire valve assembly will need to be replaced.Disconnect the water lines, remove the old valve, and install the new one, making sure to reconnect all hoses and wires securely.Turn the appliance off, wait about 2 minutes, then turn it back on.

What to Check Next on This Amana Dishwasher Focused repair path: dishwasher fill, drain, wash motor, heating, leak, sensor, and control checks. Do not treat a returning fault as a reset-only problem; use the point in the cycle where the fault appears to choose the next check. Disconnect power before opening panels, then confirm the door latch, float, inlet valve, drain path, and harness connections are seated. Match the timing of the failure to the likely path: fill, wash circulation, drain, heat, leak detection, or control communication. Clear debris from filters, sump areas, spray arms, and the drain loop before treating the fault as a failed board. If a part is suspected, verify voltage or continuity where appropriate and match the complete Amana dishwasher model number before ordering. Check, inspect, clean, test, measure, remove, reconnect, clear, and replace parts only when the symptom supports that path. If these checks point toward a part, verify the complete Amana model number from the appliance tag before ordering. Similar error wording can use different valves, sensors, pumps, motors, heaters, locks, switches, fans, or control boards depending on the exact model.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • Loose or corroded wiring at the water inlet valve
  • Failed water inlet valve solenoid

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: W11175771

Price noted in the current guide: $49-$99

Why this part is shown: It is associated with Amana Dishwasher error 6-2 in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete dishwasher model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your dishwasher?

If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Amana Dishwasher Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

The form will be enabled after the existing subscriber database and PDF delivery are connected securely.

No spam. Unsubscribe anytime.