Bosch Refrigerator error code
Bosch Refrigerator Error E06
Water dispenser sensor issue.
Water dispenser sensor issue.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Perform a hard reset by unplugging the appliance for a few minutes.
- 2Check 2
Examine the evaporator coil area for excessive ice, which can affect sensor readings. Manually defrost if necessary.
- 3Check 3
Visually inspect the evaporator sensor for any damage and ensure its wiring is securely connected.
A quick explanation
What does E06 mean?
Water dispenser sensor issue.
The answer you came for
How to fix Bosch refrigerator error E06
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Unplug the refrigerator from the wall outlet to ensure your safety.
- 2
Step 2
2. Locate the dispenser control panel. You may need to gently pry off the outer cover using a putty knife or flat-head screwdriver. Be careful not to scratch the finish.
- 3
Step 3
3. With the cover removed, identify the water dispenser sensor. It is a small component with wires connected to it, usually positioned near the dispenser's activation lever or button.
- 4
Step 4
4. Carefully inspect the wires connected to the sensor. Look for any loose connections or signs of damage. If a wire is loose, reconnect it securely.
- 5
Step 5
5. If the wiring is secure, disconnect the old sensor from the wire harness. It may be held in place by a small clip or screw that you will need to remove.
- 6
Step 6
6. Install the new sensor, making sure to connect it firmly to the wire harness and secure it in place with its clip or screw.
- 7
Step 7
7. Snap the dispenser control panel cover back into place. Plug the refrigerator back into the power outlet and test the water dispenser to see if the error is cleared.
Read the additional checks from the current guide
How to Fix E06 Error (Step-by-Step) Unplug the refrigerator from the wall outlet to ensure your safety.Locate the dispenser control panel. You may need to gently pry off the outer cover using a putty knife or flat-head screwdriver. Be careful not to scratch the finish.With the cover removed, identify the water dispenser sensor. It is a small component with wires connected to it, usually positioned near the dispenser's activation lever or button.Carefully inspect the wires connected to the sensor. Look for any loose connections or signs of damage. If a wire is loose, reconnect it securely.If the wiring is secure, disconnect the old sensor from the wire harness. It may be held in place by a small clip or screw that you will need to remove.Install the new sensor, making sure to connect it firmly to the wire harness and secure it in place with its clip or screw.Snap the dispenser control panel cover back into place. Plug the refrigerator back into the power outlet and test the water dispenser to see if the error is cleared.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Bosch Refrigerator Bosch Refrigerator Error E06: Use the code, light, or symbol as the starting clue, then confirm what the refrigerator actually does before ordering parts. 1. Unplug the refrigerator before removing covers, touching wiring, checking fans, sensors, valves, or control boards. 2. Confirm whether the display is a normal mode/status symbol or a recurring fault that affects cooling, alarms, lights, water, or controls. 3. Start with the exact symptom and the stage where it appears: cooling, airflow, defrost, water, door sealing, sensor reading, or control response. 4. Check door gaskets, blocked vents, condenser dust, frost buildup, fan noise, temperature settings, and recent door-open events before replacing parts. 5. Let temperatures stabilize after corrections, then confirm whether the same code, alarm, or symptom returns under normal use. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the appliance tag. If the issue returns after these checks, match replacement parts to the complete Bosch refrigerator model number from the appliance tag. The same display clue can point to different components depending on the exact model and when the failure appears. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Bosch refrigerator part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Bosch refrigerator temperature sensor Common replacement category: Temperature sensor / thermistor Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for temperature, alarm, and cooling-sensor faults after the door seal, vents, and settings are checked. Search Amazon for Bosch refrigerator temperature sensor Bosch refrigerator evaporator fan motor Common replacement category: Evaporator fan motor Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for airflow, fan, and uneven-cooling symptoms after ice buildup and obstructions are ruled out. Search Amazon for Bosch refrigerator evaporator fan motor Bosch refrigerator electronic control board Common replacement category: Main electronic control board Fit note: Exact OEM part number varies by full Bosch refrigerator model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for repeated electronic, display, or cooling-control faults after connectors and power are checked. Search Amazon for Bosch refrigerator electronic control board Before ordering: match the part to the complete Bosch refrigerator model number on the appliance tag.
What may be causing it?
- Faulty evaporator sensor.
- Ice buildup on or around the sensor.
- Damaged or loose wiring for the sensor.
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 12024918
Price noted in the current guide: $15-$65
Why this part is shown: It is associated with Bosch Refrigerator error E06 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete refrigerator model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your refrigerator?
If repairing this refrigerator no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$999
Budget-friendly refrigerators in the $0-$999 range.
Shop Value Options on AmazonBest Overall
$1,000-$1,999
Balanced refrigerators in the $1,000-$1,999 range.
Shop Best Overall Options on AmazonPremium
$2,000-$5,000
Higher-end refrigerators in the $2,000-$5,000 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Bosch Refrigerator Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.