Bosch Dishwasher error code
Bosch Dishwasher Error F13
Bad EEPROM Identification/Checksum error.
Bad EEPROM Identification/Checksum error.
Try these first
Start here before buying a part or taking the appliance apart.
- 1Check 1
Turn off the dishwasher at the circuit breaker for at least 10 minutes to reset the electronics.
- 2Check 2
Test the heating element and temperature sensor (thermistor) for continuity with a multimeter.
- 3Check 3
If other checks fail, inspect the main control board for faults.
A quick explanation
What does F13 mean?
Bad EEPROM Identification/Checksum error.
The answer you came for
How to fix Bosch dishwasher error F13
Start with the safest checks and work from simple to technical.
- 1
Step 1
1. Turn off the power to the dishwasher at the circuit breaker to ensure safety.
- 2
Step 2
2. Remove the outer door panel by unscrewing it from the inside of the dishwasher door. Then, remove the lower access panel (kick plate) below the door to gain access to the dishwasher's base.
- 3
Step 3
3. Locate the main control board, which is the electronic brain of the dishwasher. It is typically housed in a plastic case on the right side of the base.
- 4
Step 4
4. Before disconnecting any wires, take a clear photograph of the connections to the control board to use as a reference for reassembly.
- 5
Step 5
5. Carefully unplug all the wire harnesses from the old control board. Release any clips or remove screws that are holding it in place, and then remove the board.
- 6
Step 6
6. Install the new control board, making sure it is securely fastened in its housing. Using your photo as a guide, reconnect all the wire harnesses to the correct terminals on the new board.
- 7
Step 7
7. Reinstall the lower access panel and the outer door panel. Turn the power back on at the circuit breaker and run a test cycle to ensure the dishwasher is functioning correctly and the error is cleared.
Read the additional checks from the current guide
How to Fix F13 Error (Step-by-Step) Turn off the power to the dishwasher at the circuit breaker to ensure safety.Remove the outer door panel by unscrewing it from the inside of the dishwasher door. Then, remove the lower access panel (kick plate) below the door to gain access to the dishwasher's base.Locate the main control board, which is the electronic brain of the dishwasher. It is typically housed in a plastic case on the right side of the base.Before disconnecting any wires, take a clear photograph of the connections to the control board to use as a reference for reassembly.Carefully unplug all the wire harnesses from the old control board. Release any clips or remove screws that are holding it in place, and then remove the board.Install the new control board, making sure it is securely fastened in its housing. Using your photo as a guide, reconnect all the wire harnesses to the correct terminals on the new board.Reinstall the lower access panel and the outer door panel. Turn the power back on at the circuit breaker and run a test cycle to ensure the dishwasher is functioning correctly and the error is cleared.Turn the appliance off, wait about 2 minutes, then turn it back on.
What to Check Next on This Bosch Dishwasher Bosch Dishwasher Error F13: Use the code, light, or symbol as the starting clue, then confirm what the dishwasher actually does before ordering parts. 1. Turn power off before opening panels, reaching into the sump, touching wiring, or checking the pump, heater, valve, sensor, latch, or control area. 2. Confirm whether the display is a normal cycle/status symbol or a recurring fault that interrupts filling, washing, draining, drying, locking, or control response. 3. Start with the wash path: filter, sump debris, spray-arm movement, circulation-pump sound, wiring, and control output. 4. Clean the filter and sump, check spray-arm movement, verify water supply, inspect the drain hose and sink connection, and correct any visible blockage before replacing parts. 5. Run a short test cycle and watch where it fails; the exact stage matters more than the displayed word or symbol by itself. 6. Replace a part only after the same symptom repeats and the model-specific checks point to that part category. Match any replacement to the complete Bosch model number on the door tag. If the issue returns after these checks, match replacement parts to the complete Bosch dishwasher model number from the door tag. The same display clue can point to different components depending on the exact model and when the failure appears. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Recommended Parts to Check No exact official OEM part number is listed here because the correct Bosch dishwasher part can vary by complete model number. These are targeted part-category searches, not universal fit claims. Bosch dishwasher water inlet valve Common replacement category: Water inlet valve Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for fill and water-supply faults after the tap, hose, and inlet screen are checked. Search Amazon for Bosch dishwasher water inlet valve Bosch dishwasher drain pump Common replacement category: Drain pump Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for drain and standing-water symptoms after the filter, sump, and hose are checked. Search Amazon for Bosch dishwasher drain pump Bosch dishwasher circulation pump Common replacement category: Circulation pump / wash motor Fit note: Exact OEM part number varies by full Bosch dishwasher model number. Confirm compatibility before buying. Confidence: MediumThis category can be relevant for wash, spray-arm, and circulation symptoms after filters and spray arms are checked. Search Amazon for Bosch dishwasher circulation pump Before ordering: match the part to the complete Bosch dishwasher model number on the appliance tag.
What may be causing it?
- Issue with the water heating system
- Faulty temperature sensor
- Defective heating element
- Fault in the main control board
These are possibilities to investigate, not proof that one part has failed.
Recommended part
Recommended part for this error code
Replacement part
OEM candidate: 12041766
Price noted in the current guide: $150-$350
Why this part is shown: It is associated with Bosch Dishwasher error F13 in the current guide. The error code alone does not prove this part has failed.
Compatibility varies by model. Confirm that the Amazon listing includes your complete dishwasher model number before ordering.
You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.
Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.Replacement options
Ready to replace your dishwasher?
If repairing this dishwasher no longer feels worthwhile, compare three replacement paths below.
Why shop your replacement on Amazon?
-
Fast, free delivery
Prime members can get fast, free delivery on eligible items.
-
Convenient delivery options
Select large appliances may offer scheduled or Room of Choice delivery.
-
Haul-away options
Haul-away may be available for select appliances and delivery areas.
-
Installation help
Installation or assembly may be available on select items.
Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.
Value
$0-$499
Budget-friendly dishwashers in the $0-$499 range.
Shop Value Options on AmazonBest Overall
$500-$899
Balanced dishwashers in the $500-$899 range.
Shop Best Overall Options on AmazonPremium
$900-$2,000
Higher-end dishwashers in the $900-$2,000 range.
Shop Premium Options on AmazonMake the money decision
Repair or replace calculator
Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.
Safety first
Disconnect power before opening panels or touching internal parts.
When to stop
- Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
- Do not perform live-voltage testing unless you are trained and equipped for it.
- Use the exact model manual or service information before replacing electronic controls.
Free quick sheet
Get the Bosch Dishwasher Error Code Quick Sheet
A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.
No spam. Unsubscribe anytime.