How to Fix Bosch Dryer Error CONDENSATE CONTAINER FULL SYMBOL

Bosch Dryer Error CONDENSATE CONTAINER FULL SYMBOL overlay image

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: CONDENSATE CONTAINER FULL SYMBOL Difficulty: Easy

Problem: The water collection container needs to be emptied.

⚖️ Repair Decision
⚠️ CHECK WARRANTY / AGE

no_parts

How to Fix CONDENSATE CONTAINER FULL SYMBOL Error (Step-by-Step)

  1. Pause the current drying cycle by pressing the ‘Start/Pause’ button.
  2. Locate the condensate water container. On most Bosch dryers, it is a pull-out drawer located at the top left of the control panel.
  3. Carefully slide the container all the way out of the dryer. It may be heavy if full, so use both hands.
  4. Carry the container to a sink or drain and empty all the water out.
  5. While it is empty, you can rinse the container with fresh water to prevent any buildup.
  6. Carefully slide the empty container back into its slot until it is fully seated. The dryer will not run if the container is not correctly in place.
  7. Press the ‘Start/Pause’ button to clear the warning and resume the drying cycle.
  8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

What to Check Next on This Bosch Dryer

Use these checks before ordering parts for Bosch dryer CONDENSATE CONTAINER FULL SYMBOL. They keep the diagnosis tied to the appliance instead of turning the page into a reset-only guide.

  1. Unplug the dryer before touching the lint housing, rear vent, lower service area, or any wiring.
  2. Clean the lint screen, moisture sensor bars, condenser area if equipped, and the full vent path so airflow problems do not imitate part failures.
  3. Run a short timed cycle with a light load and note whether the fault appears immediately, after heating starts, or near the end of the cycle.
  4. If the fault returns with clean airflow, inspect the part categories below using the full model number from the dryer tag.
  5. Stop repeated test cycles if you smell heat, see moisture near electrical areas, or hear grinding from the drum drive.

Recommended Parts to Check

Bosch dryer part numbers vary by model. These are model-number-safe part-category searches, not universal fit claims.

  • Dryer lint screen
    Common replacement category: lint filter
    Fit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.
    Why check it: Start with lint restrictions when heating, airflow, or maintenance warnings appear.

    Search Amazon for Dryer lint screen

  • Dryer thermal fuse
    Common replacement category: thermal protection
    Fit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.
    Why check it: Common safety device to inspect after overheating or no-heat symptoms.

    Search Amazon for Dryer thermal fuse

  • Dryer drum belt
    Common replacement category: drive system
    Fit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.
    Why check it: Worth checking when the dryer tumbles poorly, stalls, or makes drive noise.

    Search Amazon for Dryer drum belt

  • Dryer moisture sensor
    Common replacement category: sensor circuit
    Fit note: Exact OEM part number varies by full model number. Confirm compatibility before buying.
    Why check it: Useful category to verify when dryness or care/maintenance messages persist.

    Search Amazon for Dryer moisture sensor

Before ordering: match the part to the complete model number on the appliance tag.

💬 Chat with a Certified Technician Now

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Bosch model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download


Browse More Codes

📖 View All Error Codes

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Bosch error codes: Bosch Error Codes

When It’s Better to Replace Than Repair

Dryer repairs are often worth it for small parts, but repeated heating, motor, drum, or control failures can point toward replacement.
Confirm gas vs electric, venting, voltage, doorway clearance, and laundry-space dimensions before ordering.
For repair parts, verify exact fit with the full dryer model number before buying; these links are general replacement-appliance shopping options.

  • [OK]Thermal fuse or heater failures keep returning
  • [OK]Belt, roller, or motor repairs exceed unit value
  • [OK]Door switch or control issues stack with other faults
  • [OK]Older dryer has long dry times even after vent cleaning

Recommended Dryer Replacement Options

Electric Dryers

240V Vented Models

  • Most common electric replacement type
  • Confirm 3-prong vs 4-prong cord needs
  • Verify vent path and laundry-space depth

Shop Electric Dryers

Gas Dryers

Natural Gas Dryer Options

  • Confirm gas supply and shutoff location
  • Use qualified installation when required
  • Do not substitute electric for gas without planning

Compare Gas Dryers

Compact and Ventless

Small-Space Dryer Choices

  • Good for apartments and tight closets
  • Confirm ventless condensation requirements
  • Check capacity before replacing full-size units

View Compact Dryers

As an Amazon Associate, we earn from qualifying purchases.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *