How to Fix Electrolux Dishwasher Error I20 / 20

Electrolux Dishwasher Error I20 / 20 overlay image

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: I20 / 20 Difficulty: Moderate

Problem: The dishwasher is not draining water properly. This can be caused by a clogged drain system, a defective or blocked drain pump, or a pinched or bent drain hose.

⚖️ Repair Decision
⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix I20 / 20 Error (Step-by-Step)

  1. Turn off power to the dishwasher at the circuit breaker.
  2. Check the drain hose for any kinks or bends that could restrict water flow. Straighten it if necessary.
  3. Remove the bottom dish rack and clean the filter assembly at the bottom of the tub. Remove any food debris or blockages.
  4. If the issue persists, you may need to access the drain pump. Disconnect the dishwasher and lay it on its back on a towel.
  5. Remove the bottom access panel to locate the drain pump (Part #154757901).
  6. Disconnect the hoses and wiring from the pump and check for blockages in the pump itself.
  7. If the pump is clear but not working, replace it with a new one, reconnect everything, and test the dishwasher.
  8. Turn the appliance off, wait about 2 minutes, then turn it back on.

Recommended Replacement Part

OEM Part #: 154757901

Estimated Market Price: $90-$160

Check Price & Availability →

Verified Compatible Alternatives:

  • A00044305
  • 140000443030

When It’s Better to Replace Than Repair

Dishwasher repairs can add up quickly when the pump, control, heater, or leak-related parts fail.
Confirm cabinet width, water line, drain routing, electrical connection, and panel style before ordering.
For repair parts, verify exact fit with the full dishwasher model number before buying; these links are general replacement-appliance shopping options.

  • [OK]Drain pump or circulation pump failure
  • [OK]Leaking tub, door, or float-switch issues
  • [OK]Heater or control failures on an older unit
  • [OK]Repeated poor washing or drying performance

Recommended Dishwasher Replacement Options

Built-In Dishwashers

Standard 24-Inch Models

  • Common under-counter replacement size
  • Check height, width, and toe-kick clearance
  • Match hardwire or cord connection requirements

Shop Built-In Dishwashers

Compact Options

18-Inch and Small-Space Models

  • Useful for narrow cabinets
  • Confirm ADA or compact dimensions
  • Verify panel and handle clearance

Compare Compact Dishwashers

Portable and Countertop

No Built-In Cabinet Cutout

  • Good for rentals or limited cabinets
  • Confirm faucet adapter compatibility
  • Measure counter or storage space

View Portable Dishwashers

As an Amazon Associate, we earn from qualifying purchases.

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

💬 Chat with a Certified Technician Now

Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)

⚡ Don’t Risk a DIY Fail!

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download


Browse More Codes

📖 View All Error Codes

Expert: Mike Sullivan

EPA Section 608 Certified Technician with 18+ years experience.

Read Editorial Standards →

Browse all Electrolux error codes: Electrolux Error Codes

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *