⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: DHE Difficulty: Hard
Problem: Drying heater error.
How to Fix DHE Error (Step-by-Step)
- Unplug the washer-dryer combo from the wall outlet to completely disconnect power.
- Remove the main top panel and the rear access panel of the appliance to get access to the internal components.
- Locate the dryer heating element assembly. It is usually a large metal box with wires leading to it, connected to the blower housing.
- Before replacing the heater, inspect the associated components like the high-limit thermostat and thermal fuse, which are mounted on the heater housing. These are often the cause of the error.
- Carefully disconnect the wires from the heating element terminals and any attached thermostats or fuses.
- Remove the screws holding the heating element assembly in its housing and slide the old element out.
- Install the new heating element, secure it with the screws, reconnect all wiring, and then reattach the appliance’s panels before restoring power.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
Recommended Replacement Part
Verified Compatible Alternatives:
- 137116700
- 137488301
- 137488302
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Electrolux error codes: Electrolux Error Codes
Leave a Reply