How to Fix Electrolux Washer Error DE

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: DE Difficulty: Moderate

Problem: Door error.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix DE Error (Step-by-Step)

Disconnect the washer from its power source by unplugging it from the wall outlet.
Open the washer door to access the door lock assembly, which is located on the front frame of the machine where the door latches.
To access the lock, you must peel back the outer portion of the large rubber door seal (bellow). This is often held in place by a spring clamp that can be carefully pried off.
With the seal pulled away, you will see the screws that mount the door lock assembly to the washer’s frame. Remove these screws.
Carefully reach in and pull the lock assembly out. Disconnect the electrical wire connector attached to the back of the lock.
Plug the wire connector into the new door lock assembly, position the new lock in place, and secure it with the mounting screws.
Re-secure the rubber door seal with its clamp, plug the washer back in, and test the door.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 808455304

Estimated Market Price: $12-$86

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes