Skip to main content
Appliance Fix Guide

Electrolux Washer error code

Electrolux Washer Error LE

Water leak detected.

Water leak detected.

Updated Aug 18, 2026
Diagnose before buying a part
Electrolux washer repair guide for error LE
Error codeLEWasher

Try these first

Start here before buying a part or taking the appliance apart.

  1. 1
    Check 1

    Reduce and redistribute the laundry load.

  2. 2
    Check 2

    Power cycle the washer by turning it off for a few minutes, then restarting it.

  3. 3
    Check 3

    Check for any items caught between the drum and the tub that may be obstructing movement.

A quick explanation

What does LE mean?

Water leak detected.

The answer you came for

How to fix Electrolux washer error LE

Start with the safest checks and work from simple to technical.

  1. 1

    Step 1

    1. Disconnect the washer from the power outlet to ensure safety.

  2. 2

    Step 2

    2. Turn off both the hot and cold water supply valves connected to the back of the machine.

  3. 3

    Step 3

    3. Carefully inspect the water inlet hoses for any visible cracks, damage, or loose connections at both the washer and the wall faucets. Tighten any loose connections by hand.

  4. 4

    Step 4

    4. Check the drain hose to ensure it is securely placed in the standpipe or sink and is not clogged or kinked.

  5. 5

    Step 5

    5. The 'LE' code is often triggered by water in the base pan of the washer. Carefully tilt the machine forward at a 45-degree angle to allow any collected water to drain onto a towel or shallow pan.

  6. 6

    Step 6

    6. Thoroughly dry the area around and under the washer. Once everything is dry, reconnect the power and water supplies.

  7. 7

    Step 7

    7. Run a short rinse and spin cycle to test if the error code reappears. If the leak persists, it may be an internal issue requiring professional service.

Read the additional checks from the current guide

How to Fix LE Error (Step-by-Step) Disconnect the washer from the power outlet to ensure safety. Turn off both the hot and cold water supply valves connected to the back of the machine. Carefully inspect the water inlet hoses for any visible cracks, damage, or loose connections at both the washer and the wall faucets. Tighten any loose connections by hand. Check the drain hose to ensure it is securely placed in the standpipe or sink and is not clogged or kinked. The ‘LE’ code is often triggered by water in the base pan of the washer. Carefully tilt the machine forward at a 45-degree angle to allow any collected water to drain onto a towel or shallow pan. Thoroughly dry the area around and under the washer. Once everything is dry, reconnect the power and water supplies. Turn the appliance off, wait about 2 minutes, then turn it back on. Parts Availability Note: For this Electrolux/Frigidaire error code, exact OEM part numbers can vary by model revision and serial range. We’ve listed the most likely component(s), but confirm compatibility using your full model number before ordering. If no exact SKU is shown, use this guide for diagnosis first, then verify the matching OEM part on RepairClinic or PartSelect. Still Not Working? If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

If the code comes back

Do not keep replacing parts based only on the code. Repeat the safe checks above. If the fault remains, stop and arrange qualified service rather than ordering from the code alone.

What may be causing it?

  • The machine is overloaded.
  • The laundry load is unbalanced.
  • The drive motor is faulty.
  • The motor control board has failed.

These are possibilities to investigate, not proof that one part has failed.

Recommended part

Recommended part for this error code

Replacement part

OEM candidate: 134618213

Why this part is shown: It is associated with Electrolux Washer error LE in the current guide. The error code alone does not prove this part has failed.

Compatibility varies by model. Confirm that the Amazon listing includes your complete washer model number before ordering.

Amazon part link View recommended part on Amazon

You can open the recommendation now. Check model compatibility on the Amazon page before purchasing.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Replacement options

Ready to replace your washer?

If repairing this washer no longer feels worthwhile, compare three replacement paths below.

Why shop your replacement on Amazon?

  • Fast, free delivery

    Prime members can get fast, free delivery on eligible items.

  • Convenient delivery options

    Select large appliances may offer scheduled or Room of Choice delivery.

  • Haul-away options

    Haul-away may be available for select appliances and delivery areas.

  • Installation help

    Installation or assembly may be available on select items.

Delivery and service options, fees, and availability vary by item, seller, and delivery ZIP code. Confirm available services at Amazon checkout.

Affiliate disclosure: qualifying purchases may earn this site a commission at no additional cost to you.

Make the money decision

Repair or replace calculator

Use the age and total repair estimate to get a simple comparison. This is guidance, not a guarantee.

Safety first

Disconnect power before opening panels or touching internal parts.

When to stop
  • Stop if you see burned wiring, melted connectors, water near electrical parts, or a gas smell.
  • Do not perform live-voltage testing unless you are trained and equipped for it.
  • Use the exact model manual or service information before replacing electronic controls.

Free quick sheet

Get the Electrolux Washer Error Code Quick Sheet

A concise reference with code meanings, severity, first checks, and when it is time to stop and call for service.

No spam. Unsubscribe anytime.