How to Fix Electrolux Washer Error EHC

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: EHC Difficulty: Hard

Problem: Line WD relay failure.

⚖️ Repair Decision

⚠️ CHECK WARRANTY / AGE

$100 – $250 Range

How to Fix EHC Error (Step-by-Step)

Disconnect the washer from the wall outlet to ensure safety.
Turn off both the hot and cold water supply valves leading to the machine.
Unscrew and remove the top panel of the washer to access the internal components.
Locate the main control board, which is typically a plastic-encased circuit board with multiple wire connectors.
Carefully disconnect all wire harnesses from the old control board. Taking a photo beforehand is recommended for reference.
Remove the screws or release the clips holding the faulty board in place and swap it with the new one.
Reconnect all wiring, secure the top panel, re-establish the water and power connections, and run a test cycle.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 134523106

Estimated Market Price: $150-$335

Verified Compatible Alternatives:

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes