How to Fix Electrolux Washer Error C6

Written by

⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.

Error Code: C6 Difficulty: Moderate

Problem: Pressure switch fault.

⚖️ Repair Decision

✅ WORTH FIXING

Parts under $100

How to Fix C6 Error (Step-by-Step)

Unplug the washer from the power outlet and turn off the water supply valves.
Remove the top panel of the washer, which is typically secured by screws at the back.
Locate the pressure switch, a small round component with a thin tube and a wire connector, usually mounted to the top or side of the washer’s outer tub.
Take a photo of the connections, then carefully disconnect the wire harness and the clear air hose from the old switch.
Remove the old switch (it may be held by a screw or clip) and install the new pressure switch (Part #134762010).
Securely reconnect the wire harness and the air hose, ensuring the hose is not kinked or blocked.
Reattach the top panel, restore power and water, and run a test cycle.
Turn the appliance off, wait about 2 minutes, then turn it back on.

OEM Part #: 134762010

Estimated Market Price: $25-$50

Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.

Appliance Type

Appliance Age

Estimated repair cost (parts, or parts + labor) Most DIY parts are $50–$250. If you have a quote, use the total.

Is it under warranty?

More options (for a better recommendation)

Brand

Your DIY Skill Level

Get the ‘Secret Service Mode’ Cheat Sheet for your Electrolux model. Includes an easy-to-read list of every error code and quick diagnostic tips.

✅ Join 15,000+ DIYers • Instant PDF Download

EPA Section 608 Certified Technician with 18+ years experience.

Browse all Electrolux error codes: Electrolux Error Codes