⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: FRONT STATUS LIGHT: WHITE Difficulty: Easy
Problem: Cycle completed.
How to Fix FRONT STATUS LIGHT: WHITE Error (Step-by-Step)
- Notice that a solid white light means the wash and dry cycles are complete.
- Your dishes are now clean and ready to be unloaded.
- You can safely open the dishwasher door and confirm the error stays cleared during a full test cycle.
- Carefully unload the dishes, starting with the bottom rack to prevent any water from the top rack from dripping onto the dry dishes below.
- The light will typically turn off once you open the door.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
- Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply