⚠️ Safety Warning: Appliance repair involves electricity, gas, and moving parts. Always disconnect power before working on any appliance.
Error Code: F9F1 Difficulty: Easy
Problem: Accessory EEPROM error.
How to Fix F9F1 Error (Step-by-Step)
- Press the ‘Cancel’ or ‘Power’ button to try and clear the error code.
- Unplug the dryer from the wall outlet for at least one minute.
- While the dryer is unplugged, press and hold the ‘Start’ button for 5 seconds to discharge any residual electricity.
- Plug the dryer back in and attempt to run a cycle.
- If the code reappears, there may be an issue with the main control board, but first, try the reset procedure one more time.
- Turn the appliance off, wait about 2 minutes, then turn it back on.
- Check for simple blockages (lint screen, drain path, or filter) and clean anything you find.
Still Not Working?
If the replacement part didn’t fix the issue, you may have a wiring problem or main board failure.
Most DIY parts are $50–$250. If you have a quote, use the total.
More options (for a better recommendation)
⚡ Don’t Risk a DIY Fail!
Get the ‘Secret Service Mode’ Cheat Sheet for your Amana model. Includes an easy-to-read list of every error code and quick diagnostic tips.
✅ Join 15,000+ DIYers • Instant PDF Download
Browse More Codes
📖 View All Error Codes
Expert: Mike Sullivan
EPA Section 608 Certified Technician with 18+ years experience.
Read Editorial Standards →Browse all Amana error codes: Amana Error Codes
Leave a Reply